Filter
Top Products
CO~CTION
TE~EMTUW
COO~G
You can also convection cook with the temperature probe, to assure
that foods are cooked precisely to the degree of doneness desired, while
the constantly circulating hot air assures even cooking and delicious
browning. The temperature probe monitors the internal temperature
of the food and turns the oven off automatically when the desired
temperature is reached.
How to Convection Temperature Cook
(The metal shelf must be in place on the oven floor
when using convection or combination cooking.)
Step 1:
Insert probe
*
in food as directed in
III*
the Cookbook or in
‘\
,,
this book. Plug other
end of probe securely
o
into wall receptacle.
I
,,
I
u
Step 2:
Touch Convection COOK
COOK
pad. Time of day disappears from
the display.
Step
4: Touch the appropriate number pads in
sequence to enter the desired food temperature.
Any food temperature from
90°F.
to
199°F.
may be
programmed. For example, touch 1, 8 and O, in that
order, for
180°F.
The temperature selected is shown
on the display.
n
Step 5: Touch START pad. The
START
display shows “COOL” until the
food temperature reaches above
90°F.,
then it shows actual food
temperature as it rises. When food
reaches preselected temperature,
display shows “End,” oven signals
and turns off.
~
EH
~~
Step 3: Enter oven temperature
~
❑
@
ma
by touching the number pads that
correspond with the desired oven
temperature. For example, touch 2,
2,5 for
225°F.
Questions and Answers
Q. After I preheated my oven, I tried to set
cooking time, but nothing happened. What is
Q. Can I store the probe in the oven when it is not
in use?
the problem?
A.
A.
Until you open the oven door or touch the
CLEAWOFF
pad, the oven remains in the preheat
mode and no further instructions can be entered.
After 30 minutes oven automatically turns off.
Q. Can I check during the cooking cycle to be sure
that I have set the correct oven temperature?
A. Yes. If you touch the Convection COOK pad at
any time during cooking, the selected oven
temperature is displayed on the display.
Leaving the probe in the oven is not recommended.
If you forget and leave it in during cooking,
without having inserted it in food, damage to the
probe or to the oven may result.