Filter
Top Products
The Problem Solver
To Save lime and Money—
before you request service,
heck the Problem Solver
if
you have a problem, it may be
minor. You may be able to correct
it yourself. Just use this Problem
Solver to locate your problem and
then follow the suggested
recommendations.
PROBLEM
OVEN WILL NOT COME ON
CONTROL PANEL LIGHTED,
YET OVEN WILL NOT START
“ERROR” APPEARS
ON READOUT
“PROBE” APPEARS
ON READOUT
FOODS ARE EITHER OVER-
COOKED OR UNDERCOOKED
POSSIBLE CAUSE AND REMEDY
A fuse in your home may be blown or the circuit breaker tripped.
Replace fuse or reset circuit breaker.
Make sure 3-prong plug on oven is fully inserted into wall receptacle.
Door not securely closed.
START must be touched after entering cooking selection.
Another selection entered already in oven and CLEAR/OFF not touched
to cancel it.
Make sure you have entered cooking time after touching TIME COOK.
CLEAR/OFF was touched accidentally. Reset cooking program and
touch START.
Temperature probe not inserted properly or not being used during Auto
Roast or Temp Cook.
Make sure you have entered desired finished temperature after touching
TEMP COOKMOLD.
Make
sure you entered a code number after touching AUTO COOK,
AUTO ROAST or AUTO DEFROST.
When using Temp Cook, a temperature less than 80° or more than 199°
has been entered.
Door is opened during “AUTO” cycle of Auto Cook function. Close door
and touch START.
Weight is incorrect for Auto Defrost code on chart. It is necessary to
reset oven.
Probe has been forgotten or not seated properly in oven wall when
using Auto Roast or Temp Cook functions.
Cooking times may vary because of starting food temperature, food
density or amount of foods in oven. Touch TIME COOK and additional
cooking time for completion.
Incorrect Power Level entered. Check Cookbook for recommended
Power Level or changing levels during cooking if necessary.
Dish was not rotated, turned or stirred. Some dishes require specific
instructions. Check Cookbook or recipe for these instructions.
Too many dishes in oven at same time. Cooking time must be increased
when cooking more than one food item. Check Cookbook for recom-
mendation on increasing time.
Dish not completely covered as directed during Auto Cook.
Previous microwaving left humidity or moisture in oven, thus lessening
the cooking time in Auto Cook function.
Certain vegetables need a standing time after using Auto Cook. Check
Automatic Cooking Chart.
Oven door was opened during “AUTO” cycle of Auto Cook function.
Probe not inserted properly into meat or dish when
using Temp Cook or
Auto Roast functions. Check Cookbook or Auto Roast section of this
book for specific instructions.
33
——.—
——-—-—-—-