GE JVM64 Microwave Oven User Manual


 
we Touch Control Panel
I
1
“PROBE” Appears On Readout:
When YOU Plug in the Oven
Probe has been forgotten when Auto Roast or
Temp Cook functions are being used.
The readout panel displays five 8’s and 18 POWER
@ Probe is not securelv seated in oven wall rece~-
on the upper portion and all of the oven functions
. .. . .. . ...- .. .. .
tacle.
on tne lower portion. Atter 15 seconds, all
Ilghts
disappear and “RESET” comes on in the upper por-
tion. Touch the CLEAR/OFF pad and oven is ready
for use.
If power is disrupted at any time, the above
sequence reoccurs, and you must reset CLOCK
after touching CLEAR/OFF.
Manual Defrost. Gentle, more uniform thawing at
automatic Power Level 3, or change power level after
/entering time. (See page 9.)
Hold/Timer. This feature uses no microwave
/
energy while it functions as both a kitchen timer or
as a holding period between defrost and time or
temperature cooking. (See page 11.)
Start. Must touch this pad for oven to begin any
/
functions.
Min Pad. Use with number pads to enter whole
/
minutes.
Clear/Off. When touched, it stops the oven and er-
/
ases all settings except time of day.
Auto Roast. Insert probe, touch this pad, and
Z desired number pad for Code to slow-cook or tem-
perature cook meat with automatic preset program.
(See pages 14 and 15.)
Auto Defrost. Touch this pad, then Code number,
~ food weight and the oven automatically sets Power
Levels and defrosting time. (See page 16.)
AUTOMATIC FAN FEATURE
Cooking appliances installed under the oven might,
under some heavy usage conditions, cause temper-
atures high enough to overheat some internal parts
of the microwave oven.
To prevent overheating from taking place, the vent
fan is designed to automatically turn on at low
speed if excessive temperatures occur. Should this
happen, the fan cannot be manually turned off, but
it will automatically turn off
when the internal parts
have cooled. The fan may stay on up to approx-
imately 30 minutes after the range and microwave
oven controls have been turned off.
7