Filter
Top Products
12
Installation
Gas Downdraft Cooktop
5
Electrical
Connections
Step
•Connect the 3-pin plastic plug from the
blower/motor assembly to the 3-pin plastic
socket on the underside of the vent, next to
the conduit.
•Slide the metal cover over the connection
and secure with screws.
6
Connect
Power
Step
•Plug power cords into properly grounded
receptacle.
7
Step
Assemble
Burners,
Check
Ignition
•Connect the 6-pin plastic plug from the
downdraft assembly to the 6-pin plastic
socket on the underside of the cooktop, next
to the power cord.
•Slide the metal cover over the connection
and secure with screws.
Service
Plate
Electrical
Supply Cord
Metal Cover
Pressure
Test Point
Pressure
Regulator
Electrical
6-Pin Socket
6-Pin
Plug
•Assemble burner as shown. Check to be sure
that burner heads are securely seated and
caps are positioned as shown.
•Check for proper ignition:
–Push in one control knob and turn 90° to
HIGH position.
–The igniter will spark and the burner will
light; the igniter will cease sparking when
the burner is lit.
–First test may require some time, while air is
flushed out of the gas line.
–Turn knob to OFF.
–Repeat the procedure for each burner.
Burner Grate
Burner Cap
Burner Bowl
Burner Head
Electrode
Front
Medium Head
And Cap
Medium Head
And Cap
Large Head
And Cap
Medium Head
And Cap
Small Head
And Cap
Make sure slot in burner head
is positioned over electrode