Filter
Top Products
13
Installation
Gas Downdraft Cooktop
To raise the vent, turn the VENT knob to
RAISE/LOWER.
•Hold the knob until the vent begins to raise.
– The vent will automatically stop when it is
fully extended.
•Tip filter into the opening and pull straight
down so that the filter rests on slides.
•Slide the filter to the right side.
•Tip the other filter into the opening and
pull straight down.
•To turn the fan on, turn the FAN knob to
HIGH.
–Continue turning the FAN knob to select
a fan speed between HIGH and LOW.
Note: It is not necessary to turn the fan OFF
before lowering the vent. The fan will auto-
matically turn off when the vent is lowered.
When the fan is not turned off before lower-
ing the vent, it will automatically come on at
the previously selected speed when the vent is
fully raised.
To lower the vent, turn the VENT knob to
RAISE/LOWER. Hold the knob until the vent
begins to lower.
8
Install
Filters
Check
Operation of
Downdraft
Step