Filter
Top Products
9
Installation
Gas Downdraft Cooktop
Remove
Packaging
• Remove the shipping materials and the
carton, set carton aside. The carton can be
used as a pad when changing or adjusting
vent direction.
• Remove the plastic ties on both ends at the
top of the vent.
Plastic Ties
1
Install
Downdraft
Vent
Step
Place the downdraft vent into the countertop
cutout, against the back side.
• Secure the downdraft to the countertop
supplied brackets. See illustration.
– Fasten brackets to top screws on the front
side of the vent, secure to cabinet side wall
just below the countertop. Or,
– Fasten one bracket to vent side and secure
to cabinet back wall.
– Install two brackets on the bottom of the
vent. Attach brackets to slide screws on the
vent and to the floor using wood screws
(not supplied).
• When installing in a tile countertop surface,
it may be necessary to apply a locally
approved caulking to cover any gaps.
Secure the Lower Brackets
to Blower Housing
Preferred Method
Secure the Upper
Brackets With Screws
Located on the side of
Case and Attach to
Back Wall of Cabinet
Optional Method
Secure to Cabinet
Side With Top
Screw on Case
Or Use Second Screw