Filter
Top Products
Installation
3A0237L 19
f. Insert cap plugs over setscrews. See FIG. 11.
g. Wrap connector and wire on each side of con-
nector in black electrical tape to help seal out
moisture. Ensure 1 in. (25.4 mm) of wire on
each side of connector is wrapped.
7. Connect cables (F). Leave slack (G) in cables as
stress relief to prevent cable failure.
8. Repeat for additional hoses.
9. See Connect FTS and Heated Whip Hose, page
20.
F
IG. 11
F
IG. 12
Cap plugs
Setscrews
TI9771A
TI14734a
F
G