Filter
Top Products
Applicator Kits
3A0237L 9
Applicator Kits
The table below lists applicators that can be used with the heated hoses and identifies which applicators require sole-
noid kits. See Related Manuals for the applicator manual numbers.
NOTE: The MD2 valves must use one of the chemical connection kits to connect to the fluid hoses. See MD2
Valve Applicator Kits on page 10.
NOTE: When selecting an applicator, if an applicator is chosen which does not have a signal communicating to the
HFR, then the sizes of the A and B pumps added together must be greater or equal to 120 cc. For example: A (red)
pump size = 20 cc, B (blue) pump size = 100 cc, 20 cc + 100 cc = 120 cc. Since the pump sizes combined = 120 cc,
an applicator may be selected which does not have a signal communicating to the HFR.
Applicator Handle Options Required Solenoid Kit Pressure Relief Kit
Automatic Fusion Air Purge Guns No handle
24D161
Automatic Fusion Mechanical Purge Guns No handle
24D161
Fusion Air Purge Guns
24C067
Fusion Mechanical Purge Guns
24C067
Fusion CS Guns
24C067
EP Gun
No handle
Electric actuated pistol
1:1 and 10:1 MD2 Valves
(See MD2 Valve Applicator Kits on page 10
for models and chemical connection kits)
No handle
24D160, 24C757
Electric actuated pistol
24D160, 24C757
Pneumatic
Electric actuated lever
24D160, 24C757