Filter
Top Products
Model PFE- 590/592
3-13. PREVENTIVE Reversing Lid Gasket (Continued)
MAINTENANCE
Continued)
Be sure the metal arm on the left side of the lid is in the
vertical position holding the lid upright, or severe
injuries could result. (See photo at left.)
3. Using a thin blade screwdriver, pry out the gasket at the
corners. Remove the gasket.
Check the gasket for any tears or nicks. If the gasket is
damaged, it needs to be replaced.
4. Clean the gasket and gasket seat with hot water.
5. Rotate the gasket with the opposite side facing out.
Install the 4 corners of the lid gasket. Smooth the
gasket into place, working from the corners towards the
middle of each side.
Lubricating Lid Rollers - Annually
The lid rollers, in the back of the fryer, should be lubricated at
least once a year, to allow the lid easy movement.
1. Remove the back shroud of the fryer.
2. Using spindle lube, part number 12124, place a small amount
of lube on both top and bottom rollers. Make sure to lube
both left and right rollers.
3-17 703