Filter
Top Products
2–10 404569-001 Service Reference Guide, dx2100 MT
Setup Utilities and Diagnostics Features
Power
Management
Setup
(continued)
Power On After
Power-Fail
Allows you to select system power loss behavior:
• Last State
•On
•Off
MODEM Use IRQ Allows you to select IRQ for MODEM to use. Select NA to
disable external MODEM wake-up function.
•NA
•3
•4
•5
•7
•9
•10
•11
Resume by PME Disables/enables Resume by PME.
Wake on Device
S5
Disables/enables wake device from network.
Resume by Alarm Disables/enables RTC alarm.
Date (of Month)
Alarm
If Resume by Alarm is enabled, allows you to select the day of
the month for resumption of RTC alarm.
Time (hh:mm:ss)
Alarm
If Resume by Alarm is enabled, allows you to select what time
the RTC alarm will resume.
PnP/PCI
Configurations
Reset
Configuration
Data
Disables/enables automatic reconfiguration.
The default is Disabled. Select Enabled to reset Extended
System Configuration Data (ESCD) when you exit Setup, if you
have installed a new add-on and the system reconfiguration has
caused such a serious conflict that the OS cannot boot.
Resources
Controlled By
Allows you to select whether resources are controlled
automatically or manually:
• Auto (ESCD–Extended Storage Configuration Data)
• Manual
BIOS can automatically configure all the bootable and Plug-
and-Play-compatible devices. If you choose Auto, you cannot
select IRQ, DMA and memory base address fields since BIOS
automatically assigns them.
Heading Option Description