Hobart DRO2G Oven User Manual


 
– 12 –
MANUAL BAKING
Program # 0 is used for manual baking processes that are not assigned to memory.
1. Press the PROGRAM # UP
arrow key to 0. If the PROGRAM # UP arrow key does not change
the program number, press OFF and BAKE to reset and begin again. Program # 0 is factory
preset as follows:
SET TEMPERATURE - 350°F (176°C).
BAKE TIME - 000 min.
STEAM TIME - 00 sec.
2. Set the TEMPERATURE, BAKE TIME and STEAM TIME.
3. Use the appropriate UP and DOWN
arrow keys to adjust the settings.
4. Allow the OVEN TEMPERATURE to reach the SET TEMPERATURE.
5. Load the oven. Press TIMER START to operate.
6. When BAKE TIME display reaches 000, the display flashes and the beeper sounds.
7. See CONTROL PANEL UPDATES for setting more time, if applicable.
8. Press TIMER STOP to silence the beeper and restore the initial settings to the displays. Heat and
rack rotation remain on until you press TIMER STOP a second time.