Filter
Top Products
–11–
Manual 2 or 3 Stage Heating
Example: Heat for 1 minute 30 seconds at MEDIUM power (1st stage) and then heat for 2 minutes at
DEFROST (2nd stage).
• Open the door and place food inside the oven. Close the door. The Timer
display shows [ 0 ].
• Touch the POWER LEVEL pad until the indicator above MED is lit.
• Turn the Dial Timer until 1:30 is displayed.
• Touch the POWER LEVEL pad until the indicator above DEF is lit.
• Turn the Dial Timer until 2:00 is displayed.
• Touch the START pad. The cavity light comes on; heating begins. Total
Time for both stages [ 3:30 ] displays and counts down. Stage number
and Power level flash.
• When 2nd stage cooking begins, a single BEEP sounds.
• When the total time has elapsed, heating stops, BEEP sounds, and [ 0 ]
will flash.
• Open the door. Remove the food.
• The previously selected power, time [ 3:30 ] and two stage indicators
return to the display. Touch STOP / RESET to cancel, or place food in
oven and touch START to repeat.
For 3 stage heating, select another power level and timer setting before pressing START.
While heating, one tap on the STOP / RESET pad stops the oven. Restart by pressing START or a
second tap on the STOP / RESET pad will cancel the selected program. One tap on the STOP / RESET
pad before the heating cycle is started will cancel the selected program.
REPEAT the same manually selected heating program by touching START within 1 minute if the door
has been closed or within 30 minutes if the door has been left open. After 1 minute of non-use with
the door closed, or 30 minutes with the door open, the oven returns to standby.