–17–
Programming Beep Tone Loudness
The Beep tone can be set at one of three levels of loudness or be silent.
1. Remove air filters.
2. Press PROG.
3. Press BEEP (once to select 3 Loud)
(twice to select 2 Moderate)
(three times to select 1 Soft) or
(four times to select 0 Silent).
Repeat until the tone you want is selected.
4. Press PROG.
5. After 3 seconds, the display returns to standby (blank if door is closed).
6. Reinstall air filters.
Programming Beep Tone Duration
Duration of Beep can be selected from either of two settings: 3 seconds or 60 seconds.
1. Remove air filters.
2. Press PROG.
3. Press BEEP (once to select 3 Loud)
(twice to select 2 Moderate)
(three times to select 1 Soft) or
(four times to select 0 Silent).
Repeat until the tone you want is selected.
4. Press PROG and quickly press BEEP until 1 or 2 is displayed
( 1 Stage ~ 3 Beeps) or
( 2 Stage ~ 60 Beeps).
Repeat until the Beep duration is selected.
5. Press PROG.
6. After 3 seconds, the display returns to standby (blank if door is closed).
7. Reinstall the air filters.