Filter
Top Products
–13–
Programming Memory Pads
Example: To program memory pad A – 5 to DEFROST for 3 minutes.
• Remove the left air filter (refer to Cleaning Air Filters for removal
instructions). Press the PROG button. If no PROG indication appears in
the display, Program Lock should be cancelled. Refer to Program
Unlock.
– If you want memory pad A–5, press memory pad 5. The pad number,
A–5, and the power level and time are displayed.
–
If you want B – 5, press SHIFT and then press memory pad 5.
• Press the POWER LEVEL pad until the indicator above DEF is lit.
• Turn the Dial Timer to the right until [ 3:00 ] is displayed.
• Press the PROG button again. You have completed programming the
selected memory pad for single stage heating.
• Three seconds after programming has been completed, the display goes
blank.
• Reinstall the left air filter.
Once the memory B category has been selected, you can return to memory A only by pressing
the STOP / RESET button.
▼
A B