Hobart HM1600 Microwave Oven User Manual


 
–8–
OPERATION
CONTROLS (FIG. 3)
POWER LEVEL Touch the pad to change to the next power level: HI MED LOW DEF HOLD.
(HOLD does not apply any microwave heating; it allows time to pass so that
heat from a previous cooking stage can conduct through the product.)
SHIFT There are 16 memory pads: A1 – A8 and B1 – B8. SHIFT selects B.
1 – 8 Each memory pad has pre-programmed power level and time settings for
1, 2, or 3 stage cooking. Factory settings, described on the next page, may
be reset by programming any memory pad. Refer to Programming Memory
Pads.
STOP / RESET Touch once to interrupt heating; touch a second time to cancel.
START Begins a programmed cycle or a manual operation.
DIAL TIMER
Sets time for a manual operation, [ Minutes:Seconds ]. See Timer Range
Limits on next page.
PL-41351
A B