Filter
Top Products
–14–
Programming Memory Pads for 2 or 3 Stage Heating
Example: Program memory pad A – 5 to DEFROST for 3 minutes and then to cook on HIGH power
level for 2 minutes.
• Remove the left air filter (refer to Cleaning Air Filters for removal
instructions). Press the PROG button. If no PROG indication appears in
the display, Program Lock should be cancelled. Refer to Program
Unlock.
– If you want memory pad A–5, press memory pad 5. The pad number,
A–5, and the previously selected time and power level will appear in
the display.
– If you want B – 5, press SHIFT and then press memory pad 5.
• Press the POWER LEVEL pad until the indicator above DEF is lit.
• Turn the Dial Timer to the right until [ 3:00 ] is displayed.
• Press the POWER LEVEL pad until the indicator above HIGH is lit.
• Turn the Dial Timer to the right until [ 2:00 ] is displayed.
•
Press the PROG button again. The total time for both stages [ 5:00 ]
displays. You have completed programming memory pad A – 5 for 2 stage
heating.
• Three seconds after programming has been completed, the display goes
blank.
• Reinstall the left air filter.
For a 3 stage heating cycle, select the third power level and dial a time setting just before pressing the
PROG button for the second time.
▼
A B