Filter
Top Products
–9–
Display Time
0 to 1 minute 2 seconds
1 to 3 minutes 5 seconds
3 to 5 minutes 15 seconds
5 to 10 minutes 30 seconds
10 to 30 minutes 1 minute
30 to 60 minutes 5 minutes
Power Level Chart (approximate values)
HI MED LOW DEF HOLD
WATTS 1600 800 320 160 0
PERCENT 100 50 20 10 0
NOTE: Hold does not apply any microwave heating; it allows time to pass so that heat from a previous
cooking stage can conduct through the product.
Factory Preset
MEMORY PADS are preset to HI power level and 1 stage cooking for these times.
See Pages 13 and 14 for Programming Memory Pads to other than the previous settings.
PROG LOCK button is preset on Unlock. See Page 15, Program Lock and Program Unlock.
BEEP is preset for the loudest level (#3) and for 3 Beeps. See Page 17, Programming Beep Tone.
TIMER RANGE LIMITS
Time Range
Increments
POWER LEVEL
Time Range
Minimum Maximum
HI 2 seconds 15 minutes
MED 2 seconds 15 minutes
LOW 2 seconds 60 minutes
DEF 2 seconds 60 minutes
HOLD 2 seconds 60 minutes
NOTES:
Display will go blank (with the door closed) after 1 minute interruption of operation or 1 minute after
heating and removing food.
Display will flash [ 0 ] until door is opened and food is removed.
Oven light is on when you open the door and when heating starts.
Oven light is off when you close the door or when heating is finished.
#daPyromeM1A2A3A4A5A6A7A8A
emiTteserP.ces01.ces02.ces03.ces54.nim1.ces51.nim1.ces03.nim1.nim2