Filter
Top Products
– 11 –
SELECT PROBE:
1 41°F DONE 3
2 44°F
1:16:08 CONTINUE
SELECT PROBE:
1 39°F REMOVE 3
2 44°F
1:16:28 CONTINUE
• Press ADD/REMOVE.
• If all probes are ‘done
,’
the display goes to
HOLDING.
• Select the ‘done’ probe’s number to remove it.
• Remove all product associated with the ‘done’ probe.
• Select any other probe’s
number to stop cycle
and remove it. Answer
YES or NO.
• Press CONTINUE.
• Select NONE to continue chilling with no report.
• Or, select RECORD to print a Chill Report on Probe
#3. Refer to the alternate Print Probe menu at the
bottom of this page.
• Repeat from ☛ as each probe reaches the target
temperature.
• When all probes are done, return to the Main Menu.
• If equipped with the optional label printer, an alternate
Print Probe menu, shown at left, permits the choice of
printing . . . RECORD, LABEL or BOTH . . . types
of reports.
PRINT PROBE #3
RECORD
LABEL
NONE BOTH
CHILLING AIR: 13°F
1 39
°F 3
2 44°F
1:17:42 ADD/REMOVE
PRINTING
PLEASE WAIT...
PRINT PROBE #3
NONE RECORD
CHILLING AIR: 14°F
1 DONE 3
2 40°F
1:19:02 MUTE
STOP CYCLE ON #2
REMOVE PRODUCT?
NO YES
CHILLING AIR: 14°F
1 41°F DONE 3
2 44°F
1:16:01 ADD/REMOVE
HOLDING AIR: 37°F
1 DONE DONE 3
2 DONE
1:16:01 ADD/REMOVE