Filter
Top Products
– 6 –
PL-53383
3
5
6
1
7
2
2
4
PANEL ASSEMBLY
Each panel is locked in place with the Cam Fast
lock using the hex tool supplied (Fig. 3). Each wall
panel is locked to its adjacent sides and roof. When
an insulated floor panel is provided, wall panels are
cam locked to the insulated floor panel. If no
insulated floor panel is supplied, each wall panel
should be installed with its black vinyl screed fitted
on the bottom of the panel. Cam locks are turned
completely clockwise or counterclockwise (locking
arm retracted) before placing panels together; lock
by turning the hex tool
3
⁄4 turn in reverse. Access to
cam locks is provided inside the cabinet. Cam locks
should have their locking arm retracted before
placing panels together; lock by turning the hex
tool. Check wall panels for plumb occasionally
during assembly (Fig. 4). Assemble wall panels in
numerical order:
Fig. 3
1 FLOOR (Optional)
2 REAR (Rear Door & Frame, Optional)
3 LEFT SIDE
4 RIGHT SIDE
5 COIL & FAN UNIT
6 DOOR & FRAME
7 CEILING
Fig. 4
FOAM
PANEL SKIN
HEX OPENING
CAM FAST UNLOCKED
LOCKING ARM
STOP
STOP
FOAM
CAM FAST LOCKED
LOCKING ARM
LOCKING PIN
HEX WRENCH
PIN ASSEMBLY
ON GROOVE OF PANEL
LOCK ASSEMBLY
ON TONGUE OF PANEL