Filter
Top Products
NORMAL COOKING
With ON/OFF switch
ON
...
DISPLAY
DO
101.
ON
Press the number of the pre-programmed PRODUCT
instruction
(0-9).
102.
PRE-HT
or
COO
LNG Wait for temperature
to
stabilize at the TEMP 1 setting.
Go
to
103.
The LED of the PRODUCT selected will flash and
other products with a
TEMP-1
within
10
degrees will be lit.
Optional
Press COOL/TEMP (once)
A XXXF
= Actual temperature.
Press COOLITEMP (twice) S YYYF
= Set temperature.
Press COOLITEMP
(3
times)
Returns
to
PRE·HT or COOLNG.
103.
READY
Load Product.
"Beeper Sounds"
Other lighted PRODUCT(s) may
be
selected since the
preheat
is
satisfied. If you wish to cook one of these
products, load and press that
PRODUCT.
104.
DOOR
Close
door.
105.
READY
Press
START.
106.
Countdown begins.
I HHMMSS I
The total time for all stages programmed will be displayed and countdown begins. The normal interval between
counts
is
one second, but the interval may change due to temperature variation and the selected cooking curve.
Compatible Products
Products are compatible if they have only one cooking stage which has the same temperature and same
fan
speed
as the one-stage product being cooked. During the cooking cycle, compatible product LED'S will
be
lit. During
the cooking cycle the door may
be
opened and one of these compatible products may be put
in
the oven and
that PRODUCT number pressed. The display will flash
"OK"
if the product is compatible. If not, the display will
flash
NOT
COM
PAT.
If the product is accepted, the shortest cooking time will be displayed. If the new product
cooking time
is
less than the remaining time for the original product, the new time will
be
displayed and counted
down. When the time expires and the beeper sounds, open the door and remove the new product, close the door
and
press CLEAR. The remaining time for the original product will
be
displayed and counted down.
-10-