Filter
Top Products
Installation, Operation and Care of
PCN90 SERIES ELECTRIC CONVECTION OVENS
SAVE
THESE INSTRUCTIONS
GENERAL
The PCN90 Series electric convection ovens feature Perfect
Touch™
programmable controls. Each oven is
equipped with a
1/3
h.p.
motor.
The Model
PCN901
is a single
oven
which is furnished with a set of four
25
3
/4"
adjustable stainless steel legs.
The Model PCN902 consists
of
two single PCN90 ovens, a set of four
8"
adjustable stainless steel legs, and a
stack set for mounting one
oven
on
top of the other.
The Model PCN902
is
a single PCN90
oven
furnished with a storage stand
on
four
6"
adjustable stainless steel legs.
Accessories available include additional racks and a removable stainless steel liner kit.
INSTALLATION
UNPACKING
Immediately after unpacking, check the oven for possible shipping damage. If the oven is found to
be
damaged,
save the packaging material and contact the carrier within
15
days of delivery.
"
Prior to installation, test the electrical service to
be
sure that it agrees with the specifications
on
the
oven
data plate.
INSTALLING SINGLE OVENS
Installing Basic Oven (PCN90)
The basic oven must
be
installed
on
legs or
be
mounted
on
a modular stand. Installations
on
concrete bases or
other supports restricting air circulation
on
the bottom will void the warranty. If using the modular stand, set the
oven on the stand after uncrating.
Assembling the Legs
to
the Oven (PCN901)
1.
Position the oven
on
its back, taking care not to scratch the sides.
2.
Attach the four leg assemblies to the bottom of the oven with the twenty-four bolts and lockwashers.
3.
Reposition the oven by setting it on its legs
in
the installed position.
-3-
©
HOBART CORPORATION, 1989