Filter
Top Products
OPERATION
BEFORE FIRST USE
I
Before the oven
is
used for the first time, it must
be
"burned in" to release any odors that might result from heating
the new surfaces
in
the chamber.
Using a clean damp cloth, wipe the inside
of
the oven, including the racks.
Wipe the outer surfaces
to
remove any dirt of film that may have accumulated during shipment.
Close the oven
door,
turn the oven ON, and program one of the products for [TIME = 6:00:00; TEMP =
300°F;
FAN
=
2;
CC
= 0]. Start a cycle for this product button. Smoke with
an
unpleasant odor will normally
be given off. When the display shows DONE, press the product button to cancel.
If your oven has the painted finish, apply a generous coat of wax or another hard glossy finish that will protect
the painted surfaces.
CONTROLS
Become familiar with the location and function
of
the controls illustrated in Fig.
10
before programming the oven.
ON - OFF Switch
LIGHT Switch
DISPLAY
HEAT (LED)
CLEAR/ENTER
COOL/TEMP
START
PRODUCT
PRODUCT (LED)
Product Strip
PROGRAMMABLE CONTROLS
The maximum programmable temperature is
475
0
F.
If the temperature in the
oven
should reach 500
0
F.
the display
will flash HIGH TEMP and a warning beeper will sound.
The maximum time that can
be
programmed is
19
hours, 59 minutes and 59 seconds.
Fig.
10
-7-