Hoshizaki DCM-300BAH(-OS) Ice Maker User Manual


  Open as PDF
of 25
 
14
1. Icemaker
•Icemakerwatersupplyinletis1/2"femalepipethread(FPT).Aminimumof1/4"nominal
ID copper water tubing or equivalent is required for the icemaker water supply line.
•Anicemakerwatersupplylineshut-offvalveanddrainvalveshouldbeinstalled.
•Storagebinanddriptraydrainoutletsare3/4"FPT.Aminimumof3/4"nominalIDhard
pipe or equivalent is required for the storage bin and drip tray drain lines.
Storage Bin
Drain Outlet
3/4"FPT
Drip Tray
Drain Outlet
3/4"FPT
Fig. 4
DCM-300BAH(-OS)
Icemaker
Stand
Icemaker Water Supply
LineShut-OffValve
Icemaker Water
Supply Inlet
1/2"FPT
Icemaker Water Supply
LineDrainValve
Vent
Tube
Minimum1/4"
Nominal ID Copper
Water Tubing
Minimum3/4"NominalID
Hard Pipe
Separate piping to approved
drain. Leave a 2-inch (5-cm)
vertical air gap between the
end of each pipe and the
drain.
2-inch (5-cm)
air gap
Floor
Drain
 previous next