Hoshizaki DCM-300BAH(-OS) Ice Maker User Manual


  Open as PDF
of 25
 
17
Fig. 6
11)Disengagethesafetyswitch.Movethecontrolswitchtothe"OFF"position,thenmove
thepowerswitchtothe"OFF"position.Turnoffthepowersupply.
12) Clean the storage bin liner, cover, and components using a neutral cleaner. Rinse
thoroughly after cleaning. Replace the storage bin cover in its correct position.
WARNING! CHOKING HAZARD: Ensure all components, fasteners, and
thumbscrews are securely in place. Make sure that none have fallen into the
storage bin.
13)Movethepowerswitchtothe"ON"position,thenreplacethefrontpanelinitscorrect
position.Turnonthepowersupply,thenmovethecontrolswitchtothe"ICE"positionto
start the automatic icemaking process.
I. Dispense Mode Switch
Thedispensemodeswitchhas"CONTINUOUS"and"PORTION"positions.
Whenthedispensemodeswitchisinthe"CONTINUOUS"position,icedispenses
continuously for a maximum of 60 seconds per activation.
Whenthedispensemodeswitchisinthe"PORTION"position,icedispensesforthe
amount of time determined by the ice dispense time setting. The ice dispense time
control is located on the control board. The dial indicates dispense time in seconds.
See Fig. 6. When shipped, the ice dispense time control is set to the minimum
dispense time of 0.6 sec. At this setting, approximately 0.72 oz. of ice is dispensed. The
DCM-300BAH(-OS) dispenses approximately 1.2 oz. of ice per second.
 previous next