10
Refrigerator Door Bins and Freezer Door Tilt-Out Bins
Large Bins
The larger refrigerator door bins and freezer
tilt-out door bins are adjustable.
To remove: Lift the front of the bin straight up,
then lift up and out.
To replace or relocate: Engage the back side of
the bin in the molded supports of the door.
Then push down on the front of the bin.
Bin will lock in place.
Small Bins
To remove: Lift the front of the bin straight up
then out.
To replace: Position the bin above the
rectangular molded supports on the door.
Then slide the bin down onto the support
to lock it in place.
The snugger helps prevent tipping, spilling or
sliding of small items stored on the door shelf.
Place a finger on either side of the snugger
near the rear and move it back and forth to
fit your needs.
Not all features are on all models.
Refrigerator bin
Freezer tilt-out bin
Snugger
Bottle Retainer
The bottle retainers are adjustable and keep
tall items from tipping over.
To remove: Lift the front of the retainer straight
up, then lift it up.
To replace or relocate: Engage the back of the
bottle retainer in the molded supports on the
door. Then push down on the front of the
bottle retainer.
Bottle
retainer
About the shelves and bins.
About the refrigerator doors.
Refrigerator Doors
The refrigerator doors may feel different than
the ones you are used to. The special door
opening/closing feature makes sure the doors
close all the way and are securely sealed.
When opening and closing the door you will
notice a stop position. If the door is opened
past this stop point, the door will remain open
to allow you to load and unload food more
easily. When the door is only partially open,
it will automatically close.
The resistance you feel at the stop position will
be reduced as the door is loaded with food.
When the door is only partially open
it will automatically close.
Beyond this stop the door will
stay open.