31
Installation Instructions
TURN THE WATER ON AND
PLUG IN THE REFRIGERATOR
Arrange the coil of tubing so that it
does not vibrate against the back of the
refrigerator or against the wall. Push the
refrigerator back to the wall.
2
START THE ICEMAKER
Set the icemaker power switch to the
l position. The icemaker will not begin
to operate until it reaches its operating
temperature of –9°C or below. It will
then begin operation automatically if the
icemaker power switch is in the l position.
It will take 2–3 days to fill the ice bin.
NOTE: In lower water pressure conditions,
the water valve may turn on up to 3 times
to deliver enough water to the icemaker
.
3
Power
switch