Hotpoint 23 Refrigerator User Manual


 
22
Inserting the door panels.
Read these instructions completely and carefully.
Attach the Top Trim on the Freezer and Refrigerator Doors.
The Top Trim can be found inside the refrigerator
compartment.
With a T-20 Torxdriver, attach the Top Trim, using
two screws on each Top Trim piece, to the top of
each door. Hand tighten only. Make sure that the
top of each panel fits snugly behind the lip of the
Top Trim.
Insert the Freezer Panel and Refrigerator Panel.
Carefully push the freezer panel in until it slides into
the slot behind the door handle. Push the filler panel
(required with some door panels) in behind the
decorator panel. Repeat for refrigerator panel.
If your model has a dispenser, this step only applies
to the refrigerator panel and top freezer panel.
Insert the Bottom Freezer Panel. (on dispenser models)
Carefully push the panel in until it slides into the
slot behind the door handle. Push the filler panel
(required with some door panels) in behind the
decorator panel.
Cut-Out
Cut-Out
Top Trim Screws
Top
Freezer
Panel
Bottom
Freezer
Panel
Side Trim
Side Trim
Refrigerator
Panel
Top Trim Screws