Filter
Top Products
Care
and
Cleaning
(continued)
Light bulb
replacement
In Fresh Food Compartment
1.
Unplug refrigerator.
2. To align the control knob
properly, note position of
numbered control for proper
reassembly and pull off knob.
3.
Pull bottom of light panel down
about
l/4’’—just
enough to disengage
lip at rear from grooves in retainers
on rear wall.
4. Lift panel to disengage top from
pins on side
walls;
remove panel.
After replacing with same size
bulb, reinstall panel (hang top on
pins; pull bottom down, push it
back and release it to let lip engage
grooves in retainers). Replace
temperature control knob in OFF
position, turn it to previous setting,
and plug refrigerator back in.
In Freezer Compartment
1.
Unplug refrigerator.
m
,.
,.
2. Remove
shelfjust
below light
shield. (Shelf will be easier to
remove if it is emptied first. )
3. Pull plastic light shield toward
you. (It
will
bend to free tabs from
grooves.)
After replacing with same size
bulb,
reinstall shield and shelf and
plug refrigerator back in.
When you goon
vacation
For extended vacations or
absences, shut off power to
refrigerator, turn the numbered
control
to
OFF, clean interior with
baking soda solution of one
tablespoon of soda to one quart of
water. Wipe dry. To prevent odors,
leave open box of soda in
refrigerator. Leave doors open.
For shorter vacations, remove
perishable foods and leave controls
at regular settings. However, if
room temperature is expected to
drop below
60°F.,
follow
same
instructions as for extended
vacations.
Move
icemaker
feeler arm to OFF
(up) position and be sure to shut off
water supply to the refrigerator.
When you move
Disconnect power cord from
wall
outlet, remove all food and clean
and dry the interior.
Secure all loose items
such as
grille, shelves and storage pans by
taping them securely in
place
to
prevent damage.
Be sure refrigerator stays in
upright
position
during
actual
moving and
in van. Refrigerator must be secured
in van to prevent movement. Protect
outside of refrigerator with blanket.
18