Filter
Top Products
Solid State Monitor System
It keeps an eye on
things for you.
@Red signal light flashes to tell
you
when either door is open.
@Green signal light tells
you[hat
the Door Alarm beeper has been
set to sound after either door has
been open 30 seconds.
@Red signal light tells you when
freezer
foodkeeping
temperature is
above normal.
@Green lighted word NORMAL
indicates that no failure has been
detected by the diagnostic system.
@Flashingdiagnosticcodes
in the
display warn you when:
❑
frozen foods should be
checked.
E
m
power has been interrupted.
❑
icemaker may not be operating
properly.
❑
-
defrost system has failed.
❑
freezer control may need to be
set for a colder temperature.
What these codes mean—and
what to do when they appear—is
summarized on the inside of the
freezer compartment door
and
explained more thoroughly on
the following pages.
@
Status Check pad puts a review
of the electronic diagnosis of five
coded functions at your fingertip
and also allows you to erase codes
from display.
@
Electronic control allows you
to turn night light in water-and-ice
service on and off.
When your refrigerator
is
first
plugged in.. .
All
panel lights come on for five
seconds, a beep sounds, and lights
go
off except as follows:
●
PF
tlashes in the display. Touch
STATUS CHECK-RESET pad to
erase it.
● Green word NORMAL
glows.
● Red WARM TEMPERATURE
light glows if freezer compartment
temperature is higher than normal.
It goes off when proper
foodkeeping
temperature is reached.
● Door alarm beeper is activated
and green
light
on DOOR ALARM
pad glows.
● Red DOOR OPEN I
ight
flashes if
either door is open, goes out when
doors are shut.
. Night light in water-and-ice
service is off.