Hotpoint CSX24X Oven User Manual


 
The Problem Solver
(continued,
PROBLEM
OPERATING SOUNDS
FRESH FOOD
OR FREEZER
COMPARTMENT
TEMPERATURE
TOO WARM
FOODS DRY OUT
FROST OR
lCE
CRYSTALS ON
FROZEN FOOD
SLOW ICE CUBE
FREEZING
ICE CUBES HAVE
ODOR/TASTE
AU~MATIC
ICEMAKER
DOES NOT WORK
POSSIBLE
CAUSk;
AND
RK;hlElj}’
Q
The high speed compressor motor required to maintain near zero temperatures in the
large freezer compartment may produce higher sound levels
than
your
old
refrigerator.
Normal fan air flow-one fan blows
cold
air through the refrigerator and freezer
compartments, another fan cools the compressor motor.
These NORMAL sounds
will
also
bc
heard
from
time
[o
time:
c
Defrost timer switch clicks at defrost.
Defrost water dripping into drain pan.
Temperature control clicks ON or OFF.
Refrigerant
boihng
or gurgling.
Cracking or popping of cooling coils caused by expansion and contraction during
defrost and refrigeration following defrost.
With automatic iccmaker,
the
sound
of
cubes dropping into the bin and water
running in pipes as icemaker refills.
Temperature control not set cold enough.
Refkr
to TEMPERATURE CONTROLS
on page 5.
Warm weather—frequent door openings.
. Door left open
for
too long t
inlc.
Package may be holding door open.
————
c
Foods not covered, wrapped or sealed properly.
. Door may have been
left
ajar or package holding door open.
. Too frequent and too long door openings.
c
Frost within package is normal.
. Door may have been left ajar.
. Turn temperature of freezer compartment colder.
Old cubes need to be discarded.
. Ice storage bin needs to be
cmptied or washed.
. Unsealed packages in refrigerator and/or
Ircezer
compartments may be transmitting
odor/taste to ice cubes.
Interior of refrigerator needs cleaning-refer to page 17.
Poor-tasting incoming water. Install
water
filter—see page 12.
. Icemaker feeler arm in OFF (up) position.
Water supply turned off or not connected.
Freezer compartment too warm.
s
Cubes too small—water shutoff
valve
conrlecting
refrigerator to home water
line
may
be clogged.
Sometimes cubes
fuse
to the side
oj’
the
ice
mold
and
holcl
the
feeler
arm
in the OFF
(up) position. Remove this ice
to
restart
?he
iccmakcr.
. When reaching for cubes by hand,
y~)u
may
have
pl.lshcd
the
feeler
arm
into the OFF
(up) position by mistake.
. Piled up cubes in storage bin
may
cause
icemaker
lo
shut
off
prematurely. With
icemaker feeler arm in OFF (up) position, level cubes in bin
by
hand.
—.—.
20