Jenn-Air JER8850 Range User Manual


 
Oven Operation
¢** ,, ¢ ¢ ¢ ,,, ¢, ,, ¢ ,, ¢ ¢ , ¢ ¢ * ¢ ¢ ¢ ¢ ¢ ¢ * ¢ * * ¢ ¢ ¢ * ¢ ¢ ¢
' 3. Press the Preset (0) pad to set 350°F automatically. When
convection cooking, 325°F will be automatically set when
Preset (0) is pressed. Or press the appropriate number
pads for the desired oven temperature.
The temperature can be set from 100° to 550° F.
After four seconds the oven will begin to heat.
- the bake icon (top and bottom bars) will light;
- a red preheat indicator will light;
_ and 100° or the actual oven temperature, whichever
is higher, will appear in the display.
- when convection cooking the fan icon will begin to
rotate. The fan speed is faster when
convection roasting.
PREHEAT BAKE
INDICATOR ICON
The temperature in the display will increase in
increments until the oven reaches the preset
temperature.
When the oven is preheated, the oven will beep and the
Setting the Controls for Baking, preheat indicator light willgo off in the display. Allow
Roasting, Convection Baking 7-14 minutes for the oven to preheat.
and Convection Roasting
1. Place oven racks on proper rack portions. (See page 13.)
2. Press Bake, Convection Bake or Convection Roast pad. 4. At the end of cooking, turn the oven off by pressing the
The indicator word BAKE or ROAST will flash. Stop/Clear pad. Remove food from oven. The oven will
continue
operating
until the
Stop/Clear
pad
is
pressed.
000 and the oven icon ] ] will appear.
When convection cooking is selected, a fan icon
_ will also appear.