Filter
Top Products
Number Pads
Use to set time or temperature.
Oven Light Pad (Control Panel)
The oven lightautomatically comes on whenever the oven door is opened. When door
is closed, touch the Oven Light Pad to turn oven light on or off.
Display Window
Shows time of day, timer, and oven functions.
I DELAYSTARTCOOSTIMED
STOP TIMER _][] OVEN A
Display Numbers:
• Show time of day.
• Countdown of time remaining when using time functions.
• Show temperature of oven as it rises to reach programmed temperature and the
set temperature once it is reached.
•Recatl programmed temperature or time when commanded.
• Rounding of Display Numbers: Temperature range is 100° to550°F and can be set
in 5°increments. When settingtemperature, the control will round itto the nearest
10°. For example, if237° is entered, the controlwill roundthe temperature to 240°.
Prompts:
• Serve as a reminder to shut oven door, if itis open, for self-cleaning operation when
the word, door, is displayed.
• "Err" will appear in the Display when an improper temperature or time has been
entered. "Err" willflash and a beep will be heard three times. Then, the Display will
return to the previous Display before the error was entered.
Indicator Words:
• Flash to prompt next step.
• Indicate status of programmed function.
• Show programmed function when recalled.
Chimes vs. Beeps
• A chime sound is used to designate the end of a timing or cooking operation.
• A beep sound is used to designate an incorrect entry, door is open when set for a
self-clean, and a fault code,
!
NOTE: To change the oven to a 24 hour clock or Celsius (C) degrees, contact your I
authorized Jenn-Air service contractor or installer.
1
19