John Lewis JLBIHD908 Ventilation Hood User Manual


 
14
Something not working
Repairs and after sales service
If the appliance is not working correctly, please carry out the following checks, before contacting your local Service
Force agent.
IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or instal-
lation, a charge will be made even if the appliance is under guarantee.
Symptom
The cooker hood will not start
The cooker hood is not working effectively
The cooker hood has switched off during
operation
Solution
Check the hood is connected to the electricity supply.
Make sure the switch is in the ‘ON’ position.
Check that the fan speed is set high enough for the task
Ensure the grease filter is clean.
Ensure the kitchen is adequately vented to allow the entry
of fresh air.
If set up for recirculation, check that the charcoal filter is
still effective.
If set up for extraction, check that the ducting and outlets
are not blocked.
The safety cut-out device has been tripped.
Turn off the hob and then wait for the device to reset.
In the event of your appliance requiring service, or if
you wish to purchase spare parts, please contact our
extended warranty administrators by telephoning:
0870 01 07887
They will give you details for your local Service Force Centre.
Before calling out an engineer, please ensure you have
read the details under the heading “Something Not
Working”.
Your oven is covered by a 3 year parts and labour
guarantee (see separate details given at point of sale).
Please retain your purchase receipt safely for the service
engineer to verify the purchase details.
When you contact the Service Force Centre you will
need to give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of fault
4. The model and serial number of the appliance (found
on the rating plate - see picture)
5. The purchase date.
Please note that a valid purchase receipt is required for
in-guarantee service calls.