Filter
Top Products
7
Extraction (Ducted)
The cooker hood is more effective when installed in the
extraction mode (ducted to the outside).
Venting kits may be purchased through your retailer or
DIY store, and must be evacuated through an outside
vent of ø125 (5ins) or ø150mm (6ins).
The ducting used must be manufactured from fire retard-
ant material conforming to the relevant British Standard
or DIN 4102-B1.
When the cooker hood is ducted to the outside
the charcoal filter must be removed.
Fitting the Ducting
• To install the Ducting Version of the hood, the optional
Ducting chimney kit must be purchased.
Recirculation Mode
The cooker hood is supplied specified for use in the recircula-
tion mode, with the charcoal filter fitted.
In the recirculation mode contaminated air is passed through
the charcoal filter to be purified and recirculated into the kitch-
en through the grille outlets on either side of the chimney.
• Screw the filter cover item 16 onto the air outlet, using
four screws 12c (2.9 x 12.5) supplied.
• Fix the directional grille item 8 on the recirculation air
outlet using the 2 screws 12d (2,9 x 9,5) supplied.
• Ensure the activated charcoal filter has been fitted.