Kenmore 630.13953 Dishwasher User Manual


 
COMPONENTS
On/off switch
The on/off switch turns the dishwasher on and off and is
crucial in resetting controls.
Contacts 5 & 6 reset the control. Whenever a control won’t
reset or won’t go into wash programs, check the on/off
switch and jumper. Replace switch and jumper if they’re
faulty.
Door latch
Other than occasional misalignment, the only door latch
repairs will be replacing microswitches. Door latches are
held in place in console (frames) by tabs. It’s important
latches are properly seated in consoles and tabs are fully
inserted into latches.
Terminal block
Terminal blocks clearly show line (L), neutral (N) & ground (G) connections.
Dishwasher wire harnesses have spade terminals which connect to terminals
on the rear of the terminal block.
Terminal blocks can’t be installed in the field – the terminal box assy with
terminal block must be ordered. The terminal box assy assures the terminal
block is properly grounded to the terminal box.
Terminal box
All dishwashers have terminal boxes with covers and conduit exits.
702_58300000149896_ara_en_b