Kenmore 630.13953 Dishwasher User Manual


 
Technical Specifications
702_58300000149896_ara_en_b
Unsatisfactory washing results
o Incorrect amount of detergent.
o Utensils incorrectly arranged or rack overloaded.
o Spray arm rotation blocked by utensils.
o Spray arm nozzles need cleaning.
o Filters not properly fitted into position.
o Unsuitable cycle selected.
VII. Technical Specifications
Dishwasher ratings – Dishwashers are rated 120VAC, 60 Hz, 15A, 1450W (max.).
Maximum amp draw when heaters running ~ 11A.
Heater ratings
– 120VAC, 1200W, flow-through, heats water ~ 2ºF / minute.
Noise level – Dependent on model, from 44 db – 56 dB.
Circulation pump ratings (BLDC motor) – 120VAC, 60 Hz, 100W (~ .13 HP), 3-phase.
Drain pump ratings – 110 - 127 VAC, 60 Hz, 35W, .84A, 17 (9-vane)
Water inlet pressure range From 5 120 psi (.3 – 8.27 bar).
Circulation pump flow rate – Approximately 60 liters/minute (~ 15.85 gallons/minute)
at a pressure of 420 mbar (6.1 psi).
Drain pump flow rate – Approximately 10 liters/minute (~ 2.64 gallons/minute) at a
delivery height (head) of .9m (2.95’).
Water inlet valve flow rate – Approximately 2 liters/minute (~ .5 gallons/minute).