Filter
Top Products
Repair
CAUTION: Inner door edges are sharp! Cover door edges and remove
dispenser carefully.
VI. Door latches
Other than occasional misalignment, the only door latch repairs will be replacing
microswitches.
To remove door latches
1. Remove fascia panel -- section VD.
2. Locate door latch in console and bend out console metal tabs to allow
latch removal.
3. Remove door latch from console.
4. If door latch has a microswitch cover, disconnect wire harness and
remove microswitch & cover.
5. Remove microswitch from door latch.
HINT: Make sure plastic latch tabs are aligned & metal console tabs are
bent back completely during reassembly.
702_58300000149896_ara_en_b
m