Kenmore 795.7105 Refrigerator User Manual


 
REFRIGERATOR SHELVES
The shelves in your refrigerator are adjustable to
meet your individual storage needs. Your model may
have glass or wire shelves.
Storing similar food items together in your
refrigerator and adjusting the shelves to fit different
heights of items will make finding the exact item you
want easier; it will also reduce the amount of time
the refrigerator door is open, saving energy.
IMPORTANT: Do not clean glass shelves with warm
water while they are cold. Shelves may break if
exposed to sudden temperature changes or impact,
such as bumping. For your protection, glass shelves
are made with tempered glass, which will shatter into
small pebble-sized pieces.
NOTE: Glass shelves are heavy. Use special care
when removing them to avoid dropping them.
Adjusting Shelves
Remove shelves from the shipping position and
replace shelves in the position you want.
• To remove a shelf--Tilt up the front of the shelf in
the direction of (_ and lift it in the direction of @.
Pull the shelf out.
• To reinstall a shelf--Tilt the front of the shelf up
and guide the shelf hooks into the slots at a desired
height. Then lower the front of the shelf so that the
hooks drop into the slots.
, CAUTION: Make sure that shelves are level from
one side to the other. Failure to do so may result
in the shelf falling or spilling food.
Folding Shelf
You can store taller items such as a gallon container
or bottles by simply pushing the front half of shelf
underneath back half of shelf. Pull toward you to
return to a full shelf.
¢
24