Filter
Top Products
4-3
REASSEMBLY NOTE: When reinstalling the
control panel, insert the groove in the front of
the panel over the front edge of the cooktop
glass, and lower it onto the front of the range.
Be careful not to pinch any of the wires be-
tween the front edge of the control panel and
the chassis.
PH1
L1
L2
H2
(3) Single Infinite Switch
L3
P2
L2
(1) Dual Infinite Switch
4
NOTE: Refer to the Tech Sheet Wiring Dia-
gram that is supplied with the unit to determine
the wiring for the infinite switch you are servic-
ing.
Groove In
Control Panel
Front Edge Of
Cooktop Glass
5. To remove a bimetal switch:
a) Remove the wires from the terminals.
b) Remove the mounting screw.
Screw
L1
Ambient
Bimetal Switch
Cooling Fan
Bimetal Switch
Screw