Filter
Top Products
6-2
FAULT ERROR CODE CHARTS
FAULT CODE FIELD SERVICE MEANING
F1 Control
F2 Keypad Assembly
F3 Temp Sensor
F4 Meat Probe
F5 Input Switch
F6 Sensor or Control
F7 Keypad or Control
FAULT ERROR: F1E3
NOTE: Make sure harness to P1 connector is correct per wiring
diagram before performing the following steps!
STEP 1 Power down and wait 5 seconds
STEP 2 Power up and wait 5 seconds
STEP 3 Press the following keys:
CONVECTION NON-CONVECTION
CONV. BROIL CLEAN
CLEAN STOP TIME
BAKED GOODS 0
STOP TIME OVEN LIGHT
11
9
0
TIMER SET
STEP 4 Press START
STEP 5 Make sure Timer ID is the same as the oven
STEP 6 Press CANCEL to exit