Filter
Top Products
5-10
Refer to page 4-20 for the procedure for servic-
ing the double line break relay.
1. Unplug range or disconnect power.
2. Set the ohmmeter to the R x 100 scale.
3. Touch the ohmmeter test leads to the coil
terminals. The meter should indicate ap-
proximately 4100 Ω.
DOUBLE LINE BREAK (DLB) RELAY
Coil
Terminals
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.