Filter
Top Products
5-2
Refer to page 4-2 for the procedure for servic-
ing a single element infinite switch.
NOTE: Refer to the Wiring Diagram that is
supplied with the unit to determine the wiring
for the infinite switch you are servicing.
1. Unplug range or disconnect power.
2. Set the ohmmeter to the R x 1 scale.
3. Turn the appropriate infinite switch to the
On position.
4. Touch the ohmmeter test leads to termi-
nals L1 and P. The meter should indicate
continuity (0 Ω).
5. Touch the ohmmeter test leads to termi-
nals L1 and H1. The meter should indicate
continuity (0 Ω).
6. Touch the ohmmeter test leads to termi-
nals L2 and H2. The meter should indicate
continuity (0 Ω).
SINGLE ELEMENT
INFINITE SWITCHES
L2
L1
H1
H2
P
P
H1
L1
L2
H2
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.