Filter
Top Products
5-8
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
Refer to page 4-14 for the procedure for servic-
ing the convection fan motor.
1. Unplug range or disconnect power.
2. Set the ohmmeter to the R x 1 scale.
3. Touch the ohmmeter test leads to the
convection fan motor terminals. The meter
should indicate between 9 and 13 Ω.
CONVECTION FAN MOTOR
Refer to page 4-14 for the procedure for servic-
ing the convection bake element.
1. Unplug range or disconnect power.
2. Set the ohmmeter to the R x 1 scale.
3. Touch the ohmmeter test leads to the
convection bake element terminals. The
meter should indicate between 14 and 26
Ω.
CONVECTION BAKE ELEMENT