Filter
Top Products
NOTE: If you have difficulty removing
the pusher from the feed tube, it is
likely that food particles have become
lodged in the interlock system. To free
the pusher, soak the work bowl cover in
warm water or wash it in a dishwasher.
1. Press OFF Button.
2. Unplug the Food Processor before
disassembling.
3. Turn the work bowl cover to the left
and remove.
4. If using a disc, remove it before
removing the bowl. Place two fingers
under each side of the disc and lift it
straight up. Remove the disc stem.
5. If using the mini bowl or chef’s bowl,
grasp and remove the bowl using the
finger grips located along the top
edge of the bowl.
6. Turn the work bowl to the left to unlock
it from the base. Lift to remove.
7. The multipurpose blade can be
removed from the work bowl before
the contents are emptied. The blade
can also be held in place as you
remove food: grasp the work bowl
from the bottom and place one finger
through the center opening to grip the
blade shaft. Then remove food from
the bowl and blade with a spatula.
15
Disassembling the Food Processor
O
n
O
ff
P
u
lse
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
ENGLISH