KitchenAid KP26M1X Mixer User Manual


 
7
English
Setting up your Stand Mixer
Getting Started with your new Bowl-Lift Stand Mixer
IMPORTANT SET-UP INFORMATION:
For best performance, please go through these quick steps before using your Stand Mixer
Fig. 1
Locating Pin
Spring Latch
Pin
Fig. 2
Fig. 3
Step 1: Make sure Stand Mixer is turned to the OFF position and is unplugged.
Step 2: Attach the Stainless Steel Bowl to the Stand Mixer. Fit
Bowl Supports over Locating Pins and press down on back of the bowl until
Bowl Pin snaps into Spring Latch. (Fig. 1).
IMPORTANT: If bowl is not securely snapped into place, it will be unstable
and wobble during use.
Step 3: Attach Flat Beater. Slip Flat Beater onto the Shaft. Turn left,
hooking beater over the Pin. (Fig. 2)
Step 4: Raise Bowl to mixing position. Rotate Bowl Lift Lever
counterclockwise to the straight up position. (Fig. 3) The bowl must always
be in the raised position when mixing.
W10410027A_.indd 7 12/15/11 11:40 AM