Filter
Top Products
12 EEB 9600.0 USA
Setting the cooking time 7 (switch-off function)
The oven turns itself off when the pre-set time has elapsed.
–Press “
7
”: the light will flash
and “0.00” will appear in the
display.
– Use “+”/“-” to set the cooking
time in hours and minutes.
After approx. 3 seconds, the
timer will start and the light will
stay on continuously. The
display will show the time
remaining. Both lamps will flash
alternately.
– Set the temperature and mode.
Setting the finish time 8 (switch-off function)
Use this function if you want the oven to switch off automatically after a certain
time.
–Press “
8
”: the light will flash and
display will show the normal clock.
– Use “+”/“-” to set the desired
switch-off time.
After approx. 3 seconds. the timer
will start and the light will stay on
continuously.
The display will show the time
remaining. Both lights will flash
alternately.
– Set the temperature and mode.
Automatic turn-on and shut-off
To use the oven’s time-delay feature, you can pre-select both the cooking time
and finish time. The automatic start time itself can’t be specified. This is
determined from both settings.
F
It’s impossible to set a finish time before the start time: you will hear a
buzzer and the value in the display won’t change. If you want to shorten
the cooking time you have set, do it before you reset the finish time.
Example:
It is 8:00 a.m. and you wish to have your roast ready at 1:00 p.m. The roast
needs to be cooked for 90 minutes.
Change the cooking time “
7
” from 0.00 to 1.30. Then change the finish
time “
8
” from 9.30 a.m. to 1:00 p.m.
Once the times have been accepted, “Auto” will appear in the display and the
oven will switch on at 11:30 a.m. and off at 1:00 p.m.
This is how to set the automatic switch-on and switch-off:
– Press “
7
”: the lamp will flash
and “0.00” will appear in the
display.
– Use “+”/“-” to set the cooking
time in hours and minutes.
(For example: 90 minutes)
– Press “
8
” to confirm the input
and select the finish time. The
display will show a time (finish
time if the oven is to switch on
right away).
– Use “+” to set the finish time.
After approx. 3 seconds. the lights
will stay on continuously. The
display will show “Auto” until the
oven switches on.
– Set the temperature and mode.
– The oven will automatically switch
on at the specified time and both
lights next to the display will flash
alternately. The time remaining
until switch-off will be shown in
the display.