Filter
Top Products
Figure 12
Cover strips - Figure 12
Before connection to the water supply, the cover
strips provided must be fitted to the appliance. It is
necessary because the appliance will be moved
into its recess.
• Removethecoverbandfromthestripsandstick
them to the left and right front edge of the appli-
ance housing (Figure 12).
Mounting the anti tipping device
in cabinets deeper than 24" -
Figure 10 - 11
To ensure the compressor mounting plate reaches
the anti tipping bracket in cabinets deeper than
24", a wooden spacer must be mounted between
the appliance back and the wall. The anti tipping
bracket will be fastened to the floor downwards and
to the spacer backwards.
Be sure the wooden spacer is fastened
securely to the floor.
Figure 10
Measuring for mounting the wooden spacer
on frameless kitchen cabinets - Figure 11
Figure 11
Panel thickness
Depth of spacer depending on
clearance between appliance and wall
Depth of spacer depending on
clearance between appliance and wall
Measuring for mounting the wooden spacer
on inset kitchen cabinets - Figure 10
IMPORTANT
If the floor slopes down sideways, the anti-
tipping bracket must be fitted horizontally. Lay
down spacers in the appropriate positions.
9
BlockInG for safety