Filter
Top Products
Range Cleaning Chart (continued)
Removing Range for Cleaning and
Servicing
When necessary, follow these procedures to remove 5, Reverse procedure to reinstall. If gas line has been
appliance for cleaning or servicing: disconnected, cheek for gas leaks after reeonneetion.
(See Installation Instructions for gas leak test
1. Shut offthe gas supply to the appliance, method.)
2. Disconnect the electrical supply to the appliance.
3, Disconnect gas supply tubing to appliance,
4. Slide range forward to disengage range from the
anti-tip bracket. (See Installation Instructions for
location of bracket.)
PAGE 10