Filter
Top Products
MAINTENANCE
Electrical Connection WARNING: To reduce the_skofaeeidental
Appliances which require electrical power are
equipped with a three-prong grounding plug
which must be plugged directly into a properly
grounded three-hole 120 volt electrical outlet, bracket slot.
If an ungrounded, two-hole or other type
electrical outlet is encountered, it is the
personal responsibility of the appliance
owner to have receptacle replaced with a
properly grounded three hole electrical Light Replacement
outlet. Tile three-prong grounding plug is Before replacing the light bulb, disconnect the
provided for protection against shock hazards, power to the range. Be sure the bulb is cool.
Do not cut or remove the third grounding Do not touch a hot bulb with a clamp cloth as the
prong from the power cord plug. bulb may break.
To Replace Oven Light
Very carefully unscrew the lens cover with a dry
_'"/_'"-_-_x'l potholder to prevent possible harm to hands,
_ then very carefully remove the bulb with a dry
__ potholder. Replace with a 40 watt appliance
_ bulb. Reconnect the power to the range and
..... reset the clock to the current time-of-day.
-- 0
Always disconnect power to appliance before servicing.
Leveling Legs
Some floors are not level. For proper baking,
your range must be level. The leveling legs are
located on each corner of the base of the range. Oven Door
Level the range by turning the legs.
Do not place excessive weight on an open oven
door or stand on an open oven door as, in some
cases, it could damage the door, cause the range
to tip over and possibly injure the user.
When opening the oven door, allow steam and
hot air to escape before reaching into the oven to
check, add or remove food.
PAGE 19