Filter
Top Products
^
Undo ball joint d using a spanner
and remove it.
^
Stand the appliance doors up one by
one, and slacken the hinges at the
front (the hinges remain open).
^
Remove caps a from the top and
bottom of each door (if the caps are
not in place, they will have been
supplied separately with the
appliance).
^
Remove screws b from all of the
hinges, and refit each hinge in its
diagonally opposite corner.
Do not close up the hinges. Danger
of injury.
^
Use a powered screwdriver to secure
the hinges; screws b are
self-tapping.
^
Replace caps a in the vacant holes
on the opposite side.
To secure the soft-close mechanism
^
Place the two doors with the outer
side downwards on a stable surface.
^ Screw ball joint d of soft-close
mechanism c into the new fixing
holes.
^ Push tension spring a inwards
again.
^
Screw mounting b onto the hinge
and tighten securely.
^
Open out soft-close mechanism c
and hook it onto ball joint d.
Changing the door hinging
47